- Posts: 19
- Thank you received: 3
Online Forums
Technical support is provided through Support Forums below. Anybody can view them; you need to Register/Login to our site (see links in upper right corner) in order to Post questions. You do not have to be a licensed user of our product.
Please read Rules for forum posts before reporting your issue or asking a question. OPC Labs team is actively monitoring the forums, and replies as soon as possible. Various technical information can also be found in our Knowledge Base. For your convenience, we have also assembled a Frequently Asked Questions page.
Do not use the Contact page for technical issues.
- Forum
- Discussions
- QuickOPC-Classic in .NET
- Reading, Writing, Subscriptions, Property Access
- omron opc reading and writing variables
omron opc reading and writing variables
05 Dec 2022 09:29 #11287
by Fietta
Replied by Fietta on topic omron opc reading and writing variables
Thank you too
Please Log in or Create an account to join the conversation.
05 Dec 2022 09:24 #11286
by support
Replied by support on topic omron opc reading and writing variables
Thank you!
Please Log in or Create an account to join the conversation.
05 Dec 2022 09:08 #11284
by Fietta
Replied by Fietta on topic omron opc reading and writing variables
Sorry for the wait
1) int32 was fine
2) NJ501 - 1300 Vers. 1.46
3) Yes
4)Result (value): Opc.Ua.BuildInfo {BuildInfo} @2022-12-02T15:49:32.536 @@2022-12-05T08:55:29.639; Good
├─ServerTimestampLocal = 05/12/2022 09:55:29
├─SourceTimestampLocal = 02/12/2022 16:49:32
├─StatusCode = Good
├─StatusInfo = Normal
├─Value = Opc.Ua.BuildInfo
│ ├─ProductUri = urn:OMRON:NxOpcUaServer
│ ├─ManufacturerName = OMRON Corporation
│ ├─ProductName = NxOpcUaServer
│ ├─SoftwareVersion = 1.03.04
│ ├─BuildNumber = 0001
│ ├─BuildDate = 14/07/2021 03:30:17
│ ├─TypeId = i=338
│ ├─BinaryEncodingId = i=340
│ ├─XmlEncodingId = i=339
│ └─JsonEncodingId = i=15361
└─ValueType = Opc.Ua.BuildInfo
Command finished: read|r (3,3 seconds).
1) int32 was fine
2) NJ501 - 1300 Vers. 1.46
3) Yes
4)Result (value): Opc.Ua.BuildInfo {BuildInfo} @2022-12-02T15:49:32.536 @@2022-12-05T08:55:29.639; Good
├─ServerTimestampLocal = 05/12/2022 09:55:29
├─SourceTimestampLocal = 02/12/2022 16:49:32
├─StatusCode = Good
├─StatusInfo = Normal
├─Value = Opc.Ua.BuildInfo
│ ├─ProductUri = urn:OMRON:NxOpcUaServer
│ ├─ManufacturerName = OMRON Corporation
│ ├─ProductName = NxOpcUaServer
│ ├─SoftwareVersion = 1.03.04
│ ├─BuildNumber = 0001
│ ├─BuildDate = 14/07/2021 03:30:17
│ ├─TypeId = i=338
│ ├─BinaryEncodingId = i=340
│ ├─XmlEncodingId = i=339
│ └─JsonEncodingId = i=15361
└─ValueType = Opc.Ua.BuildInfo
Command finished: read|r (3,3 seconds).
The following user(s) said Thank You: support
Please Log in or Create an account to join the conversation.
01 Dec 2022 15:15 #11276
by support
Replied by support on topic omron opc reading and writing variables
Hello.
Can you now help me too? Because normally this should not be necessary, and I'd like to get to the bottom of it. I'd like to know
1) Which of the types has worked in the end (Int16, Int32, Int64)?
2) You mentioned "omron", but can you be more specific as to which model/version etc.?
3) I assume this is an OPC UA server that is embedded inside some PLC, and not a PC-based OPC UA server. Is that correct?
4) Would you be willing to extract more information about the server, by downloading the current version of the OpcCmd utility from kb.opclabs.com/Tool_Downloads#OpcCmd_Utility , and then, from inside that utility (at the OpcCmd> prompt), enter the following command:
and post here the screenshot?
Thank you
Can you now help me too? Because normally this should not be necessary, and I'd like to get to the bottom of it. I'd like to know
1) Which of the types has worked in the end (Int16, Int32, Int64)?
2) You mentioned "omron", but can you be more specific as to which model/version etc.?
3) I assume this is an OPC UA server that is embedded inside some PLC, and not a PC-based OPC UA server. Is that correct?
4) Would you be willing to extract more information about the server, by downloading the current version of the OpcCmd utility from kb.opclabs.com/Tool_Downloads#OpcCmd_Utility , and then, from inside that utility (at the OpcCmd> prompt), enter the following command:
uaClient read //172.16.253.6:4840 --NodeStandardName Server_ServerStatus_BuildInfoThank you
Please Log in or Create an account to join the conversation.
01 Dec 2022 14:47 #11275
by Fietta
Replied by Fietta on topic omron opc reading and writing variables
Hi , as you told after i declared the typer of date the error has gone, thanks
The following user(s) said Thank You: support
Please Log in or Create an account to join the conversation.
29 Nov 2022 16:12 #11270
by Fietta
Replied by Fietta on topic omron opc reading and writing variables
Ok, tomorrow morning i will try because now they have turned off the system
i will let you know tomorrow,
really thank you
i will let you know tomorrow,
really thank you
Please Log in or Create an account to join the conversation.
29 Nov 2022 15:47 #11269
by support
Replied by support on topic omron opc reading and writing variables
Can you modify your code according to opclabs.doc-that.com/files/onlinedocs/QuickOpc/Latest/User%2...d%20specify%20data%20type.html , and in the last argument to WriteValue, vary
- typeof(Int16)
- typeof(Int32)
- typeof(Int64)
Thank you
- typeof(Int16)
- typeof(Int32)
- typeof(Int64)
Thank you
Please Log in or Create an account to join the conversation.
29 Nov 2022 15:40 #11268
by Fietta
Replied by Fietta on topic omron opc reading and writing variables
199, but i tried also 1 and 200
Please Log in or Create an account to join the conversation.
29 Nov 2022 15:38 #11267
by support
Replied by support on topic omron opc reading and writing variables
Thank you, this is what I wanted, now one more question: What is the actual value that you are trying to write, in your test?
Please Log in or Create an account to join the conversation.
29 Nov 2022 14:41 #11266
by Fietta
Replied by Fietta on topic omron opc reading and writing variables
That's waht the program print (i used 3 variables but they are pretty the same)
Value: Integer
Value.ExpandedText: nsu=http://opcfoundation.org/UA/ ;i=27
Value.NamespaceUriString: opcfoundation.org/UA/
Value.NamespaceIndex: 0
Value.NumericIdentifier: 27
Value: Integer
Value.ExpandedText: nsu=http://opcfoundation.org/UA/ ;i=27
Value.NamespaceUriString: opcfoundation.org/UA/
Value.NamespaceIndex: 0
Value.NumericIdentifier: 27
Value: Integer
Value.ExpandedText: nsu=http://opcfoundation.org/UA/ ;i=27
Value.NamespaceUriString: opcfoundation.org/UA/
Value.NamespaceIndex: 0
Value.NumericIdentifier: 27
Value: Integer
Value.ExpandedText: nsu=http://opcfoundation.org/UA/ ;i=27
Value.NamespaceUriString: opcfoundation.org/UA/
Value.NamespaceIndex: 0
Value.NumericIdentifier: 27
Value: Integer
Value.ExpandedText: nsu=http://opcfoundation.org/UA/ ;i=27
Value.NamespaceUriString: opcfoundation.org/UA/
Value.NamespaceIndex: 0
Value.NumericIdentifier: 27
Value: Integer
Value.ExpandedText: nsu=http://opcfoundation.org/UA/ ;i=27
Value.NamespaceUriString: opcfoundation.org/UA/
Value.NamespaceIndex: 0
Value.NumericIdentifier: 27
Please Log in or Create an account to join the conversation.
Moderators: support
- Forum
- Discussions
- QuickOPC-Classic in .NET
- Reading, Writing, Subscriptions, Property Access
- omron opc reading and writing variables
Time to create page: 0.095 seconds