OPC Studio User's Guide and Reference
WriteValue(IEasyUAClient,UAEndpointDescriptor,UANodeDescriptor,Object) Method
Example 



OpcLabs.EasyOpcUA Assembly > OpcLabs.EasyOpc.UA Namespace > IEasyUAClientExtension Class > WriteValue Method : WriteValue(IEasyUAClient,UAEndpointDescriptor,UANodeDescriptor,Object) Method
The client object that will perform the operation.
Endpoint descriptor. Identifies the OPC-UA server.
Node descriptor. Identifies the node in OPC server's address space.
The value to be written.
Writes a value into an attribute an OPC server. Only the item value is written (status code and timestamps are not written). Writes value into a Value attribute of a node, using an endpoint descriptor and a node Id.
Syntax
'Declaration
 
<ExtensionAttribute()>
Public Overloads Shared Function WriteValue( _
   ByVal client As IEasyUAClient, _
   ByVal endpointDescriptor As UAEndpointDescriptor, _
   ByVal nodeDescriptor As UANodeDescriptor, _
   ByVal value As Object _
) As ValueTuple(Of Boolean,Boolean)
'Usage
 
Dim client As IEasyUAClient
Dim endpointDescriptor As UAEndpointDescriptor
Dim nodeDescriptor As UANodeDescriptor
Dim value As Object
Dim value As ValueTuple(Of Boolean,Boolean)
 
value = IEasyUAClientExtension.WriteValue(client, endpointDescriptor, nodeDescriptor, value)

Parameters

client
The client object that will perform the operation.
endpointDescriptor
Endpoint descriptor. Identifies the OPC-UA server.
nodeDescriptor
Node descriptor. Identifies the node in OPC server's address space.
value
The value to be written.
Exceptions
ExceptionDescription

A null reference (Nothing in Visual Basic) is passed to a method that does not accept it as a valid argument.

This is a usage error, i.e. it will never occur (the exception will not be thrown) in a correctly written program. Your code should not catch this exception.

The OPC UA operation has failed. This operation exception in uniformly used to allow common handling of various kinds of errors. The System.Exception.InnerException always contains information about the actual error cause.

This is an operation error that depends on factors external to your program, and thus cannot be always avoided. Your code must handle it appropriately.

Remarks

You can obtain nodeDescriptor e.g. by calling one of the browsing methods on EasyUAClientCore object.

The component will determine the type of the Value attribute from the DataType and ValueRank attributes of the node first. This can have negative implication on the performance, and introduces a dependency of the value written on the behavior of the OPC server itself. Use a method overload that allows to specify the attribute type or type code to prevent this.

Example

.NET

.NET

COM

.NET

COM

.NET

.NET

// This example shows how to write a value into a single node.
//
// Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

using System;
using OpcLabs.EasyOpc.UA;
using OpcLabs.EasyOpc.UA.OperationModel;

namespace UADocExamples._EasyUAClient
{
    partial class WriteValue
    {
        public static void Main1()
        {
            UAEndpointDescriptor endpointDescriptor =
                "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer";
            // or "http://opcua.demo-this.com:51211/UA/SampleServer" (currently not supported)
            // or "https://opcua.demo-this.com:51212/UA/SampleServer/"

            // Instantiate the client object.
            var client = new EasyUAClient();

            Console.WriteLine("Modifying value of a node...");
            try
            {
                client.WriteValue(endpointDescriptor, "nsu=http://test.org/UA/Data/ ;i=10221", 12345);
            }
            catch (UAException uaException)
            {
                Console.WriteLine($"*** Failure: {uaException.GetBaseException().Message}");
                return;
            }

            Console.WriteLine("Finished.");
        }
    }
}
# This example shows how to write a value into a single node.
#
# Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

#requires -Version 5.1
using namespace OpcLabs.EasyOpc.UA
using namespace OpcLabs.EasyOpc.UA.OperationModel

# The path below assumes that the current directory is [ProductDir]/Examples-NET/PowerShell/Windows .
Add-Type -Path "../../../Components/Opclabs.QuickOpc/net472/OpcLabs.EasyOpcUA.dll"
Add-Type -Path "../../../Components/Opclabs.QuickOpc/net472/OpcLabs.EasyOpcUAComponents.dll"

[UAEndpointDescriptor]$endpointDescriptor =
    "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer"
# or "http://opcua.demo-this.com:51211/UA/SampleServer" (currently not supported)
# or "https://opcua.demo-this.com:51212/UA/SampleServer/"

# Instantiate the client object.
$client = New-Object EasyUAClient

Write-Host "Modifying value of a node..."
try {
    $client.WriteValue($endpointDescriptor, "nsu=http://test.org/UA/Data/ ;i=10221", 12345)
}
catch [UAException] {
    Write-Host "*** Failure: $($PSItem.Exception.GetBaseException().Message)"
    return
}

Write-Host "Finished."
# This example shows how to write a value into a single node.
#
# Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .
# OPC client and subscriber examples in Python on GitHub: https://github.com/OPCLabs/Examples-QuickOPC-Python .
# The QuickOPC package is needed. Install it using "pip install opclabs_quickopc".
import opclabs_quickopc

# Import .NET namespaces.
from OpcLabs.EasyOpc.UA import *
from OpcLabs.EasyOpc.UA.OperationModel import *


# Instantiate the client object.
client = EasyUAClient()

# Perform the operation.
try:
    IEasyUAClientExtension.WriteValue(client,
        UAEndpointDescriptor('opc.tcp://opcua.demo-this.com:51210/UA/SampleServer'),
        UANodeDescriptor('nsu=http://test.org/UA/Data/ ;i=10221'),
        12345)
except UAException as uaException:
    print('*** Failure: ' + uaException.GetBaseException().Message)
    exit()

print('Finished.')
' This example shows how to write a value into a single node.
'
' Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

Imports OpcLabs.EasyOpc.UA
Imports OpcLabs.EasyOpc.UA.OperationModel

Namespace _EasyUAClient
    Partial Friend Class WriteValue
        Public Shared Sub Main1()

            ' Define which server we will work with.
            Dim endpointDescriptor As UAEndpointDescriptor =
                    "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer"
            ' or "http://opcua.demo-this.com:51211/UA/SampleServer" (currently not supported)
            ' or "https://opcua.demo-this.com:51212/UA/SampleServer/"

            ' Instantiate the client object
            Dim client = New EasyUAClient()

            ' Modify value of a node
            Try
                client.WriteValue(endpointDescriptor, "nsu=http://test.org/UA/Data/ ;i=10221", 12345)
            Catch uaException As UAException
                Console.WriteLine("*** Failure: {0}", uaException.GetBaseException.Message)
                Exit Sub
            End Try
        End Sub
    End Class
End Namespace
// Shows how to write complex data with OPC UA Complex Data plug-in.
//
// Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

using System;
using OpcLabs.BaseLib.DataTypeModel;
using OpcLabs.EasyOpc.UA;
using OpcLabs.EasyOpc.UA.ComplexData;
using OpcLabs.EasyOpc.UA.OperationModel;

namespace UADocExamples.ComplexData._EasyUAClient
{
    class WriteValue
    {
        public static void Main1()
        {
            // Define which server and node we will work with.
            UAEndpointDescriptor endpointDescriptor =
                "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer";
            // or "http://opcua.demo-this.com:51211/UA/SampleServer" (currently not supported)
            // or "https://opcua.demo-this.com:51212/UA/SampleServer/"
            UANodeDescriptor nodeDescriptor =
                "nsu=http://test.org/UA/Data/ ;i=10239"; // [ObjectsFolder]/Data.Static.Scalar.StructureValue

            // Instantiate the client object.
            var client = new EasyUAClient();

            // Read a node which returns complex data. 
            // We know that this node returns complex data, so we can type cast to UAGenericObject.
            Console.WriteLine("Reading...");
            UAGenericObject genericObject;
            try
            {
                genericObject = (UAGenericObject)client.ReadValue(endpointDescriptor, nodeDescriptor);
            }
            catch (UAException uaException)
            {
                Console.WriteLine("*** Failure: {0}", uaException.GetBaseException().Message);
                return;
            }


            // Modify the data read.
            // This node returns one of the two data types, randomly (this is not common, usually the type is fixed). The
            // data types are sub-types of one common type which the data type of the node. We therefore use the data type 
            // ID in the returned UAGenericObject to detect which data type has been returned.

            // For processing the internals of the data, refer to examples for GenericData and DataType classes.
            // We know how the data is structured, and have hard-coded a logic that modifies certain values inside. It is
            // also possible to discover the structure of the data type in the program, and write generic clients that can 
            // cope with any kind of complex data.
            //
            // Note that the code below is not fully robust - it will throw an exception if the data is not as expected.
            Console.WriteLine("Modifying...");
            Console.WriteLine(genericObject.DataTypeId);
            if (genericObject.DataTypeId.NodeDescriptor.Match("nsu=http://test.org/UA/Data/ ;i=9440"))  // ScalarValueDataType
            {
                // Negate the byte in the "ByteValue" field.
                var structuredData = (StructuredData)genericObject.GenericData;
                var byteValue = (PrimitiveData)structuredData.FieldData["ByteValue"];
                byteValue.Value = (Byte)~((Byte)byteValue.Value);
                Console.WriteLine(byteValue.Value);
            }
            else if (genericObject.DataTypeId.NodeDescriptor.Match("nsu=http://test.org/UA/Data/ ;i=9669")) // ArrayValueDataType
            {
                // Negate bytes at indexes 0 and 1 of the array in the "ByteValue" field.
                var structuredData = (StructuredData)genericObject.GenericData;
                var byteValue = (SequenceData)structuredData.FieldData["ByteValue"];
                var element0 = (PrimitiveData)byteValue.Elements[0];
                var element1 = (PrimitiveData)byteValue.Elements[1];
                element0.Value = (Byte)~((Byte)element0.Value);
                element1.Value = (Byte)~((Byte)element1.Value);
                Console.WriteLine(element0.Value);
                Console.WriteLine(element1.Value);
            }


            // Write the modified complex data back to the node.
            // The data type ID in the UAGenericObject is borrowed without change from what we have read, so that the server
            // knows which data type we are writing. The data type ID not necessary if writing precisely the same data type
            // as the node has (not a subtype).
            Console.WriteLine("Writing...");
            try
            {
                client.WriteValue(endpointDescriptor, nodeDescriptor, genericObject);
            }
            catch (UAException uaException)
            {
                Console.WriteLine("*** Failure: {0}", uaException.GetBaseException().Message);
            }
        }
    }
}
# Shows how to write complex data with OPC UA Complex Data plug-in.
#
# Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .
# OPC client and subscriber examples in Python on GitHub: https://github.com/OPCLabs/Examples-QuickOPC-Python .
# The QuickOPC package is needed. Install it using "pip install opclabs_quickopc".
import opclabs_quickopc

# Import .NET namespaces.
from System import *
from OpcLabs.BaseLib.DataTypeModel import *
from OpcLabs.EasyOpc.UA import *
from OpcLabs.EasyOpc.UA.OperationModel import *


endpointDescriptor = UAEndpointDescriptor('opc.tcp://opcua.demo-this.com:51210/UA/SampleServer')
# or 'http://opcua.demo-this.com:51211/UA/SampleServer' (currently not supported)
# or 'https://opcua.demo-this.com:51212/UA/SampleServer/'

# [ObjectsFolder]/Data.Static.Scalar.StructureValue
nodeDescriptor = UANodeDescriptor('nsu=http://test.org/UA/Data/ ;i=10239')

# Instantiate the client object.
client = EasyUAClient()

# Read a node which returns complex data.
# We know that this node returns complex data, so we can type cast to UAGenericObject.
try:
    print('Reading...')
    genericObject = IEasyUAClientExtension.ReadValue(client, endpointDescriptor, nodeDescriptor)
except UAException as uaException:
    print('*** Failure: ' + uaException.GetBaseException().Message)
    exit()

# Modify the data read.
# This node returns one of the two data types, randomly (this is not common, usually the type is fixed). The
# data types are sub-types of one common type which the data type of the node. We therefore use the data type
# ID in the returned UAGenericObject to detect which data type has been returned.
#
# For processing the internals of the data, refer to examples for GenericData and DataType classes.
# We know how the data is structured, and have hard-coded a logic that modifies certain values inside. It is
# also possible to discover the structure of the data type in the program, and write generic clients that can
# cope with any kind of complex data.
#
# Note that the code below is not fully robust - it will throw an exception if the data is not as expected.
print ('Modifying...')
print(genericObject.DataTypeId)
if genericObject.DataTypeId.NodeDescriptor.Match(UANodeDescriptor('nsu=http://test.org/UA/Data/ ;i=9440')):  # ScalarValueDataType
    # Negate the byte in the "ByteValue" field.
    structuredData = genericObject.GenericData
    byteValue = structuredData.FieldData.get_Item('ByteValue')  # PrimitiveData
    byteValue.Value = (~byteValue.Value) & 0xFF
    print(byteValue.Value)
elif genericObject.DataTypeId.NodeDescriptor.Match(UANodeDescriptor('nsu=http://test.org/UA/Data/ ;i=9669')): # ArrayValueDataType
    # Negate bytes at indexes 0 and 1 of the array in the "ByteValue" field.
    structuredData = genericObject.GenericData
    byteValue = structuredData.FieldData.get_Item('ByteValue')  # SequenceData
    element0 = byteValue.Elements.get_Item(0)    # PrimitiveData
    element1 = byteValue.Elements.get_Item(1)    # PrimitiveData
    element0.Value = (~element0.Value) & 0xFF
    element1.Value = (~element1.Value) & 0xFF
    print(element0.Value)
    print(element1.Value)


# Write the modified complex data back to the node.
# The data type ID in the UAGenericObject is borrowed without change from what we have read, so that the server
# knows which data type we are writing. The data type ID not necessary if writing precisely the same data type
# as the node has (not a subtype).
try:
    print('Writing...')
    IEasyUAClientExtension.WriteValue(client, endpointDescriptor, nodeDescriptor, genericObject)
except UAException as uaException:
    print('*** Failure: ' + uaException.GetBaseException().Message)


print()
print('Finished.')
' Shows how to write complex data with OPC UA Complex Data plug-in.
'
' Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

Imports System
Imports OpcLabs.BaseLib.DataTypeModel
Imports OpcLabs.EasyOpc.UA
Imports OpcLabs.EasyOpc.UA.ComplexData
Imports OpcLabs.EasyOpc.UA.OperationModel

Namespace ComplexData._EasyUAClient

    Friend Class WriteValue

        Public Shared Sub Main1()

            ' Define which server we will work with.
            Dim endpointDescriptor As UAEndpointDescriptor =
                    "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer"
            ' or "http://opcua.demo-this.com:51211/UA/SampleServer" (currently not supported)
            ' or "https://opcua.demo-this.com:51212/UA/SampleServer/"

            ' Define which node we will work with.
            Dim nodeDescriptor As UANodeDescriptor = _
                "nsu=http://test.org/UA/Data/ ;i=10239"  ' [ObjectsFolder]/Data.Static.Scalar.StructureValue

            ' Instantiate the client object.
            Dim client = New EasyUAClient

            ' Read a node which returns complex data. 
            ' We know that this node returns complex data, so we can type cast to UAGenericObject.
            Console.WriteLine("Reading...")
            Dim genericObject As UAGenericObject
            Try
                genericObject = CType(client.ReadValue(endpointDescriptor, nodeDescriptor), UAGenericObject)
            Catch uaException As UAException
                Console.WriteLine("*** Failure: {0}", uaException.GetBaseException.Message)
                Exit Sub
            End Try


            ' Modify the data read.
            ' This node returns one of the two data types, randomly (this is not common, usually the type is fixed). The
            ' data types are sub-types of one common type which the data type of the node. We therefore use the data type 
            ' ID in the returned UAGenericObject to detect which data type has been returned.
            ' For processing the internals of the data, refer to examples for GenericData and DataType classes.
            ' We know how the data is structured, and have hard-coded a logic that modifies certain values inside. It is
            ' also possible to discover the structure of the data type in the program, and write generic clients that can 
            ' cope with any kind of complex data.
            '
            ' Note that the code below is not fully robust - it will throw an exception if the data is not as expected.
            Console.WriteLine("Modifying...")
            Console.WriteLine(genericObject.DataTypeId)
            If genericObject.DataTypeId.NodeDescriptor.Match("nsu=http://test.org/UA/Data/ ;i=9440") Then    ' ScalarValueDataType
                ' Negate the byte in the "ByteValue" field.
                Dim structuredData = CType(genericObject.GenericData, StructuredData)
                Dim byteValue = CType(structuredData.FieldData("ByteValue"), PrimitiveData)
                byteValue.Value = CType(Not CType(byteValue.Value, Byte), Byte)
                Console.WriteLine(byteValue.Value)
            ElseIf genericObject.DataTypeId.NodeDescriptor.Match("nsu=http://test.org/UA/Data/ ;i=9669") Then    ' ArrayValueDataType
                ' Negate bytes at indexes 0 and 1 of the array in the "ByteValue" field.
                Dim structuredData = CType(genericObject.GenericData, StructuredData)
                Dim byteValue = CType(structuredData.FieldData("ByteValue"), SequenceData)
                Dim element0 = CType(byteValue.Elements(0), PrimitiveData)
                Dim element1 = CType(byteValue.Elements(1), PrimitiveData)
                element0.Value = CType(Not CType(element0.Value, Byte), Byte)
                element1.Value = CType(Not CType(element1.Value, Byte), Byte)
                Console.WriteLine(element0.Value)
                Console.WriteLine(element1.Value)
            End If


            ' Write the modified complex data back to the node.
            ' The data type ID in the UAGenericObject is borrowed without change from what we have read, so that the server
            ' knows which data type we are writing. The data type ID not necessary if writing precisely the same data type
            ' as the node has (not a subtype).
            Console.WriteLine("Writing...")
            Try
                client.WriteValue(endpointDescriptor, nodeDescriptor, genericObject)
            Catch uaException As UAException
                Console.WriteLine("*** Failure: {0}", uaException.GetBaseException.Message)
                Exit Sub
            End Try
        End Sub
    End Class
End Namespace
// Shows how to write complex data with OPC UA Complex Data plug-in.
//
// Find all latest examples here : https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

class procedure WriteValue.Main;
var
  ArrayValueDataType: _UANodeDescriptor;
  ByteValue: _PrimitiveData;
  ByteValue2: _SequenceData;
  Client: _EasyUAClient;
  Element0, Element1: _PrimitiveData;
  EndpointDescriptor: string;
  GenericObject: _UAGenericObject;
  NodeDescriptor: string;
  ScalarValueDataType: _UANodeDescriptor;
  StructuredData: _StructuredData;
begin
  // Define which server and node we will work with.
  EndpointDescriptor := 
    //'http://opcua.demo-this.com:51211/UA/SampleServer';
    //'https://opcua.demo-this.com:51212/UA/SampleServer/';
    'opc.tcp://opcua.demo-this.com:51210/UA/SampleServer';
  NodeDescriptor := 'nsu=http://test.org/UA/Data/ ;i=10239';  // [ObjectsFolder]/Data.Static.Scalar.StructureValue

  // Instantiate the client object
  Client := CoEasyUAClient.Create;

  // Read a node which returns complex data.
  // We know that this node returns complex data, so we can type cast to UAGenericObject.
  WriteLn('Reading...');

  try
    GenericObject := _UAGenericObject(IUnknown(Client.ReadValue(EndpointDescriptor, NodeDescriptor)));
  except
    on E: EOleException do
    begin
      WriteLn(Format('*** Failure: %s', [E.GetBaseException.Message]));
      Exit;
    end;
  end;

  // Modify the data read.
  // This node returns one of the two data types, randomly (this is not common, usually the type is fixed). The
  // data types are sub-types of one common type which the data type of the node. We therefore use the data type
  // ID in the returned UAGenericObject to detect which data type has been returned.

  // For processing the internals of the data, refer to examples for GenericData and DataType classes.
  // We know how the data is structured, and have hard-coded a logic that modifies certain values inside. It is
  // also possible to discover the structure of the data type in the program, and write generic clients that can
  // cope with any kind of complex data.
  //
  // Note that the code below is not fully robust - it will throw an exception if the data is not as expected.

  WriteLn('Modifying...');
  WriteLn(GenericObject.DataTypeId.ToString);
  ScalarValueDataType := CoUANodeDescriptor.Create;
  ScalarValueDataType.NodeId.ExpandedText := 'nsu=http://test.org/UA/Data/ ;i=9440'; // ScalarValueDataType
  if GenericObject.DataTypeId.NodeDescriptor.Match(ScalarValueDataType) then
  begin
    // Negate the byte in the "ByteValue" field.
    StructuredData := IUnknown(GenericObject.GenericData) as _StructuredData;
    ByteValue := IUnknown(StructuredData.FieldData['ByteValue']) as _PrimitiveData;
    ByteValue.Value := Byte(not (Byte(byteValue.Value)));
    WriteLn(ByteValue.Value);
  end
  else
  begin
    ArrayValueDataType := CoUANodeDescriptor.Create;
    ArrayValueDataType.NodeId.ExpandedText := 'nsu=http://test.org/UA/Data/ ;i=9669'; // ArrayValueDataType
    if GenericObject.DataTypeId.Nodedescriptor.Match(ArrayValueDataType) then
    begin
      // Negate bytes at indexes 0 and 1 of the array in the "ByteValue" field.
      StructuredData := IUnknown(GenericObject.GenericData) as _StructuredData;
      ByteValue2 := IUnknown(StructuredData.FieldData['ByteValue']) as _SequenceData;
      Element0 := IUnknown(ByteValue2.Elements[0]) as _PrimitiveData;
      Element1 := IUnknown(ByteValue2.Elements[1]) as _PrimitiveData;
      Element0.Value := Byte(not (Byte(element0.Value)));
      Element1.Value := Byte(not (Byte(element1.Value)));
      WriteLn(Element0.Value);
      WriteLn(Element1.Value);
    end;
  end;

  // Write the modified complex data back to the node.
  // The data type ID in the UAGenericObject is borrowed without change from what we have read, so that the server
  // knows which data type we are writing. The data type ID not necessary if writing precisely the same data type
  // as the node has (not a subtype).
  WriteLn('Writing...');
  try
    Client.WriteValue(EndpointDescriptor, NodeDescriptor, GenericObject);
  except
    on E: EOleException do
    begin
      WriteLn(Format('*** Failure: %s', [E.GetBaseException.Message]));
      Exit;
    end;
  end;

end;
// Shows how to write complex data with OPC UA Complex Data plug-in.
//
// Find all latest examples here : https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

// Define which server and node we will work with.
$EndpointDescriptor = 
    //"http://opcua.demo-this.com:51211/UA/SampleServer";
    //"https://opcua.demo-this.com:51212/UA/SampleServer/";
    "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer";
$NodeDescriptor = "nsu=http://test.org/UA/Data/ ;i=10239";  // [ObjectsFolder]/Data.Static.Scalar.StructureValue

// Instantiate the client object
$Client = new COM("OpcLabs.EasyOpc.UA.EasyUAClient");

// Read a node which returns complex data.
// We know that this node returns complex data, so we can type cast to UAGenericObject.
printf("Reading...\n");

try
{
    $GenericObject = $Client->ReadValue($EndpointDescriptor, $NodeDescriptor);
}
catch (com_exception $e)
{
    printf("*** Failure: %s\n", $e->getMessage());
    Exit();
}

// Modify the data read.
// This node returns one of the two data types, randomly (this is not common, usually the type is fixed). The
// data types are sub-types of one common type which the data type of the node. We therefore use the data type
// ID in the returned UAGenericObject to detect which data type has been returned.

// For processing the internals of the data, refer to examples for GenericData and DataType classes.
// We know how the data is structured, and have hard-coded a logic that modifies certain values inside. It is
// also possible to discover the structure of the data type in the program, and write generic clients that can
// cope with any kind of complex data.
//
// Note that the code below is not fully robust - it will throw an exception if the data is not as expected.

printf("Modifying...\n");
printf("%s\n", $GenericObject->DataTypeId);
$ScalarValueDataType = new COM("OpcLabs.EasyOpc.UA.UANodeDescriptor");
$ScalarValueDataType->NodeId->ExpandedText = "nsu=http://test.org/UA/Data/ ;i=9440"; // ScalarValueDataType
if ($GenericObject->DataTypeId->NodeDescriptor->Match($ScalarValueDataType)) {
    // Negate the byte in the "ByteValue" field.
    $StructuredData = $GenericObject->GenericData->AsStructuredData();
    $ByteValue = $StructuredData->FieldData["ByteValue"]->AsPrimitiveData();
    $ByteValue->Value = ~($ByteValue->Value) & 255;
    printf("%s\n", $ByteValue->Value);
}
else {
    $ArrayValueDataType = new COM("OpcLabs.EasyOpc.UA.UANodeDescriptor");
    $ArrayValueDataType->NodeId->ExpandedText = "nsu=http://test.org/UA/Data/ ;i=9669"; // ArrayValueDataType
    if ($GenericObject->DataTypeId->Nodedescriptor->Match($ArrayValueDataType)) {
        // Negate bytes at indexes 0 and 1 of the array in the "ByteValue" field.
        $StructuredData = $GenericObject->GenericData->AsStructuredData();
        $ByteValue2 = $StructuredData->FieldData["ByteValue"]->AsSequenceData();
        $Element0 = $ByteValue2->Elements[0]->AsPrimitiveData();
        $Element1 = $ByteValue2->Elements[1]->AsPrimitiveData();
        $Element0->Value = ~($Element0->Value) & 255;
        $Element1->Value = ~($Element1->Value) & 255;
        printf("%s\n", $Element0->Value);
        printf("%s\n", $Element1->Value);
    }
}

// Write the modified complex data back to the node.
// The data type ID in the UAGenericObject is borrowed without change from what we have read, so that the server
// knows which data type we are writing. The data type ID not necessary if writing precisely the same data type
// as the node has (not a subtype).
printf("Writing...\n");
try
{
    $Client->WriteValue($EndpointDescriptor, $NodeDescriptor, $GenericObject);
}
catch (com_exception $e)
{
    printf("Failure: %s\n", $e->getMessage());
    Exit();
}
// This example shows how to write a value into a single node that is of type ByteString.
//
// Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

using System;
using OpcLabs.EasyOpc.UA;
using OpcLabs.EasyOpc.UA.OperationModel;

namespace UADocExamples._EasyUAClient
{
    partial class WriteValue
    {
        public static void ByteString()
        {
            UAEndpointDescriptor endpointDescriptor =
                "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer";
            // or "http://opcua.demo-this.com:51211/UA/SampleServer" (currently not supported)
            // or "https://opcua.demo-this.com:51212/UA/SampleServer/"

            // Instantiate the client object.
            var client = new EasyUAClient();

            Console.WriteLine("Modifying value of a node...");
            try
            {
                client.WriteValue(endpointDescriptor, "nsu=http://test.org/UA/Data/ ;i=10230", 
                    new byte[] {11, 22, 33, 44, 55});
            }
            catch (UAException uaException)
            {
                Console.WriteLine($"*** Failure: {uaException.GetBaseException().Message}");
                return;
            }

            Console.WriteLine("Finished.");
        }
    }
}
# This example shows how to write a value into a single node that is of type ByteString.
#
# Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

#requires -Version 5.1
using namespace OpcLabs.EasyOpc.UA
using namespace OpcLabs.EasyOpc.UA.AddressSpace
using namespace OpcLabs.EasyOpc.UA.OperationModel

# The path below assumes that the current directory is [ProductDir]/Examples-NET/PowerShell/Windows .
Add-Type -Path "../../../Components/Opclabs.QuickOpc/net472/OpcLabs.EasyOpcUA.dll"
Add-Type -Path "../../../Components/Opclabs.QuickOpc/net472/OpcLabs.EasyOpcUAComponents.dll"

[UAEndpointDescriptor]$endpointDescriptor =
    "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer"
# or "http://opcua.demo-this.com:51211/UA/SampleServer" (currently not supported)
# or "https://opcua.demo-this.com:51212/UA/SampleServer/"

# Instantiate the client object.
$client = New-Object EasyUAClient

Write-Host "Modifying value of a node..."
try {
    $client.WriteValue($endpointDescriptor, [UANodeId]"nsu=http://test.org/UA/Data/ ;i=10230", 
        @(11, 22, 33, 44, 55))
}
catch [UAException] {
    Write-Host "*** Failure: $($PSItem.Exception.GetBaseException().Message)"
    return
}

Write-Host "Finished."
# This example shows how to write a value into a single node that is of type ByteString.
#
# Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .
# OPC client and subscriber examples in Python on GitHub: https://github.com/OPCLabs/Examples-QuickOPC-Python .
# The QuickOPC package is needed. Install it using "pip install opclabs_quickopc".
import opclabs_quickopc

# Import .NET namespaces.
from OpcLabs.EasyOpc.UA import *
from OpcLabs.EasyOpc.UA.OperationModel import *


endpointDescriptor = UAEndpointDescriptor('opc.tcp://opcua.demo-this.com:51210/UA/SampleServer')
# or 'http://opcua.demo-this.com:51211/UA/SampleServer' (currently not supported)
# or 'https://opcua.demo-this.com:51212/UA/SampleServer/'

# Instantiate the client object.
client = EasyUAClient()

print('Modifying value of a node...')
try:
    IEasyUAClientExtension.WriteValue(client,
        endpointDescriptor,
        UANodeDescriptor('nsu=http://test.org/UA/Data/ ;i=10230'),
        [11, 22, 33, 44, 55])
except UAException as uaException:
    print('*** Failure: ' + uaException.GetBaseException().Message)
    exit()

print('Finished.')
' This example shows how to write a value into a single node that is of type ByteString.
'
' Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

Imports OpcLabs.EasyOpc.UA
Imports OpcLabs.EasyOpc.UA.OperationModel

Namespace _EasyUAClient
    Partial Friend Class WriteValue
        Public Shared Sub ByteString()

            ' Define which server we will work with.
            Dim endpointDescriptor As UAEndpointDescriptor =
                    "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer"
            ' or "http://opcua.demo-this.com:51211/UA/SampleServer" (currently not supported)
            ' or "https://opcua.demo-this.com:51212/UA/SampleServer/"

            ' Instantiate the client object
            Dim client = New EasyUAClient()

            ' Modify value of a node
            Try
                client.WriteValue(endpointDescriptor, "nsu=http://test.org/UA/Data/ ;i=10230", New Byte() {11, 22, 33, 44, 55})
            Catch uaException As UAException
                Console.WriteLine("*** Failure: {0}", uaException.GetBaseException.Message)
                Exit Sub
            End Try
        End Sub
    End Class
End Namespace
// This example shows how to write a value into a single node that is of type ByteString.
//
// Find all latest examples here : https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

#include "stdafx.h"    // Includes "QuickOpc.h", and other commonly used files
#include <atlcom.h>
#include <atlsafe.h>
#include "WriteValue.h"

namespace _EasyUAClient
{
    void WriteValue::ByteString()
    {
        // Initialize the COM library
        CoInitializeEx(NULL, COINIT_MULTITHREADED);
        {
            // Instantiate the client object
            _EasyUAClientPtr ClientPtr(__uuidof(EasyUAClient));

            // Prepare the value to be written
            CComSafeArray<BYTE> array(5);
            array.SetAt(0, 11);
            array.SetAt(1, 22);
            array.SetAt(2, 33);
            array.SetAt(3, 44);
            array.SetAt(4, 55);

            const CComVariant value(array);
            
            // Perform the operation
            ClientPtr->WriteValue(
                //L"http://opcua.demo-this.com:51211/UA/SampleServer", 
                L"opc.tcp://opcua.demo-this.com:51210/UA/SampleServer",
                L"nsu=http://test.org/UA/Data/ ;i=10230",
                value);
        }
        // Release all interface pointers BEFORE calling CoUninitialize()
        CoUninitialize();
    }
}
// This example shows how to write a value into a single node that is of type ByteString.
//
// Find all latest examples here : https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

class procedure WriteValue.ByteString;
var
  Client: OpcLabs_EasyOpcUA_TLB._EasyUAClient;
  Values: OleVariant;
begin
  Values := VarArrayCreate([0, 4], varByte);
  Values[0] := 11;
  Values[1] := 22;
  Values[2] := 33;
  Values[3] := 44;
  Values[4] := 55;

  // Instantiate the client object
  Client := CoEasyUAClient.Create;

  // Modify value of a node
  try
    Client.WriteValue(
      //'http://opcua.demo-this.com:51211/UA/SampleServer',
      //'https://opcua.demo-this.com:51212/UA/SampleServer/',
      'opc.tcp://opcua.demo-this.com:51210/UA/SampleServer',
      'nsu=http://test.org/UA/Data/ ;i=10230', Values);
  except
    on E: EOleException do
    begin
      WriteLn(Format('*** Failure: %s', [E.GetBaseException.Message]));
      Exit;
    end;
  end;

  VarClear(Values);
end;
// This example shows how to write a value into a single node that is of type ByteString.
//
// Find all latest examples here : https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

$Values[0] = 11;
$Values[1] = 22;
$Values[2] = 33;
$Values[3] = 44;
$Values[4] = 55;

// Instantiate the client object
$Client = new COM("OpcLabs.EasyOpc.UA.EasyUAClient");

// Modify value of a node
try
{
    $Client->WriteValue(
        //"http://opcua.demo-this.com:51211/UA/SampleServer", 
        "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer", 
        "nsu=http://test.org/UA/Data/ ;i=10230", 
        $Values);
}
catch (com_exception $e)
{
    printf("*** Failure: %s\n", $e->getMessage());
}
REM This example shows how to write a value into a single node that is of type ByteString.
REM
REM Find all latest examples here : https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

Public Sub WriteValue_ByteString_Command_Click()
    OutputText = ""

    Dim Values(4) As Byte
    Values(0) = 11
    Values(1) = 22
    Values(2) = 33
    Values(3) = 44
    Values(4) = 55

    ' Instantiate the client object
    Dim Client As New EasyUAClient

    ' Perform the operation
    On Error Resume Next
    Call Client.WriteValue("opc.tcp://opcua.demo-this.com:51210/UA/SampleServer", "nsu=http://test.org/UA/Data/ ;i=10230", Values)
    If Err.Number <> 0 Then
        OutputText = OutputText & "*** Failure: " & Err.Source & ": " & Err.Description & vbCrLf
        Exit Sub
    End If
    On Error GoTo 0

End Sub
// This example shows how to write a value into a single node that is an array of Int32.
//
// Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

using System;
using OpcLabs.EasyOpc.UA;
using OpcLabs.EasyOpc.UA.OperationModel;

namespace UADocExamples._EasyUAClient
{
    partial class WriteValue
    {
        public static void ArrayOfInt32()
        {
            UAEndpointDescriptor endpointDescriptor =
                "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer";
            // or "http://opcua.demo-this.com:51211/UA/SampleServer" (currently not supported)
            // or "https://opcua.demo-this.com:51212/UA/SampleServer/"

            // Instantiate the client object
            var client = new EasyUAClient();

            Console.WriteLine("Modifying value of a node...");
            try
            {
                var arrayValue = new Int32[] { 11111, 22222, 33333, 44444, 55555, 66666, 77777 };
                client.WriteValue(endpointDescriptor,
                    "nsu=http://test.org/UA/Data/ ;ns=2;i=10305",   // /Data.Static.Array.Int32Value
                    arrayValue);
            }
            catch (UAException uaException)
            {
                Console.WriteLine($"*** Failure: {uaException.GetBaseException().Message}");
                return;
            }

            Console.WriteLine("Finished.");
        }
    }
}
# This example shows how to write a value into a single node that is an array of Int32.
#
# Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .
# OPC client and subscriber examples in Python on GitHub: https://github.com/OPCLabs/Examples-QuickOPC-Python .
# The QuickOPC package is needed. Install it using "pip install opclabs_quickopc".
import opclabs_quickopc

# Import .NET namespaces.
from OpcLabs.EasyOpc.UA import *
from OpcLabs.EasyOpc.UA.OperationModel import *


endpointDescriptor = UAEndpointDescriptor('opc.tcp://opcua.demo-this.com:51210/UA/SampleServer')
# or 'http://opcua.demo-this.com:51211/UA/SampleServer' (currently not supported)
# or 'https://opcua.demo-this.com:51212/UA/SampleServer/'

# Instantiate the client object.
client = EasyUAClient()

print('Modifying value of a node...')
try:
    arrayValue = [11111, 22222, 33333, 44444, 55555, 66666, 77777]
    IEasyUAClientExtension.WriteValue(client,
        endpointDescriptor,
        UANodeDescriptor('nsu=http://test.org/UA/Data/ ;i=10305'),  # /Data.Static.Array.Int32Value
        arrayValue)
except UAException as uaException:
    print('*** Failure: ' + uaException.GetBaseException().Message)
    exit()

print('Finished.')
' This example shows how to write a value into a single node that is an array of Int32.
'
' Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

Imports OpcLabs.EasyOpc.UA
Imports OpcLabs.EasyOpc.UA.OperationModel

Namespace _EasyUAClient
    Partial Friend Class WriteValue
        Public Shared Sub ArrayOfInt32()

            ' Define which server we will work with.
            Dim endpointDescriptor As UAEndpointDescriptor =
                    "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer"
            ' or "http://opcua.demo-this.com:51211/UA/SampleServer" (currently not supported)
            ' or "https://opcua.demo-this.com:51212/UA/SampleServer/"

            ' Instantiate the client object
            Dim client = New EasyUAClient()

            ' Modify value of a node
            Try
                ' // /Data.Static.Array.Int32Value
                Dim arrayValue = New Int32() {11111, 22222, 33333, 44444, 55555, 66666, 77777}
                client.WriteValue(endpointDescriptor, "nsu=http://test.org/UA/Data/ ;i=10305", arrayValue)
            Catch uaException As UAException
                Console.WriteLine("*** Failure: {0}", uaException.GetBaseException.Message)
                Exit Sub
            End Try
        End Sub
    End Class
End Namespace
// This example shows how to write an ever-incrementing value to an OPC UA variable.
//
// Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

using System;
using System.Threading;
using OpcLabs.EasyOpc.UA;
using OpcLabs.EasyOpc.UA.AddressSpace;
using OpcLabs.EasyOpc.UA.OperationModel;

namespace UADocExamples._EasyUAClient
{
    partial class WriteValue
    {
        public static void Incrementing()
        {
            UAEndpointDescriptor endpointDescriptor =
                "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer";
            // or "http://opcua.demo-this.com:51211/UA/SampleServer" (currently not supported)
            // or "https://opcua.demo-this.com:51212/UA/SampleServer/"
            UANodeId nodeId = "nsu=http://test.org/UA/Data/ ;i=10221";
            // Example settings with Softing dataFEED OPC Suite: 
            //UAEndpointDescriptor endpointDescriptor =
            //    "opc.tcp://localhost:4980/Softing_dataFEED_OPC_Suite_Configuration1";
            //UANodeId nodeId = "nsu=Local%20Items ;s=Local Items.EAK_Test1.EAK_Testwert1_I4";

            // Instantiate the client object
            var client = new EasyUAClient();

            //
            int i = 0;

            do
            {
                Console.WriteLine($"@{DateTime.Now}: Writing {i}");
                try
                {
                    client.WriteValue(endpointDescriptor, nodeId, i);
                }
                catch (UAException uaException)
                {
                    Console.WriteLine("*** Failure: {0}", uaException.GetBaseException().Message);
                    return;
                }
                i = unchecked((i + 1) & 0x7FFFFFFF);
                Thread.Sleep(2 * 1000);
            } while (!Console.KeyAvailable);
        }
    }
}
' This example shows how to write an ever-incrementing value to an OPC UA variable.
'
' Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

Imports System.Threading
Imports Opc.Ua
Imports OpcLabs.EasyOpc.UA
Imports OpcLabs.EasyOpc.UA.AddressSpace
Imports OpcLabs.EasyOpc.UA.OperationModel

Namespace _EasyUAClient
    Partial Friend Class WriteValue
        Public Shared Sub Incrementing()

            ' Define which server we will work with.
            Dim endpointDescriptor As UAEndpointDescriptor =
                    "opc.tcp://opcua.demo-this.com:51210/UA/SampleServer"
            ' or "http://opcua.demo-this.com:51211/UA/SampleServer" (currently not supported)
            ' or "https://opcua.demo-this.com:51212/UA/SampleServer/"
            Dim nodeId As UANodeId = "nsu=http://test.org/UA/Data/ ;i=10221"
            ' Example settings with Softing dataFEED OPC Suite: 
            'Dim endpointDescriptor As UAEndpointDescriptor =
            '    "opc.tcp://localhost:4980/Softing_dataFEED_OPC_Suite_Configuration1"
            'Dim nodeId As UANodeId = "nsu=Local%20Items ;s=Local Items.EAK_Test1.EAK_Testwert1_I4"

            ' Instantiate the client object
            Dim client = New EasyUAClient()

            '
            Dim i As Integer = 0

            Do
                Console.WriteLine($"@{DateTime.Now}: Writing {i}")
                Try
                    client.WriteValue(endpointDescriptor, nodeId, i)
                Catch uaException As UAException
                    Console.WriteLine("*** Failure: {0}", uaException.GetBaseException.Message)
                    Exit Sub
                End Try
                i = CInt((CLng(i) + 1) And &H7FFFFFFF)
                Thread.Sleep(2 * 1000)
            Loop Until Console.KeyAvailable
        End Sub
    End Class
End Namespace
Requirements

Target Platforms: .NET Framework: Windows 10 (selected versions), Windows 11 (selected versions), Windows Server 2016, Windows Server 2022; .NET: Linux, macOS, Microsoft Windows

See Also